NU-LOK (Orthodontic Light Band Cement with Fluoride)

Warning: NU-LOK ORTHODONTIC LIGHT BAND CEMENT contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals May cause eye and skin irritation

Precautions: Avoid eye and skin contact. Wear gloves when handling this material

First aid: Immediately flush with plenty of water See a physician if irritation persists.

Precaution: Please follow manufacturer’s directions on the handling proper use and recommendations for eye protection, when using a curing light

 

Contents


  • 1 – 5g. NU-LOK syringe

Product Details


Warning: NU-LOK ORTHODONTIC LIGHT BAND CEMENT contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals May cause eye and skin irritation

Precautions: Avoid eye and skin contact. Wear gloves when handling this material

First aid: Immediately flush with plenty of water See a physician if irritation persists.

Precaution: Please follow manufacturer’s directions on the handling proper use and recommendations for eye protection, when using a curing light

Indications for Use


A: tooth preparation:
  1. Rinse thoroughly
  2. Isolate teeth.
  3. dry with oil and moisture-free air thoroughly
B: Acid etching:

Apply Etching Gel to tooth surfaces, provided with the etching gel delivery system. If using other gel etching systems consult the manufacturer’s instructions for proper  technique and recommended etching times. Allow 30-60 seconds for etching. Then rinse thoroughly.

C: Placement and Curing
  1. Air dry.

For opening the occlusion of the patient
 Apply NU-LOK into the bite model or the maxillary molar teeth central fossa After final position, Curing light for about 20 seconds.

For band bonding
Apply the NU-LOK into the band, light curing for 2 seconds. Remove the extra NU-LOK from the teeth, Curing the light on the side of the band for about 20 seconds.

D: Storage and Use
  1. Store in a cool, dry place, away from heat, light and ignition sources.
  2. Don’t store material in proximity to eugenol-containing products as this may inhibit the proper adhesive curing.
  3. This system is designed to be used at room temperature (20-25℃,68-77 oF). Storage between 2-27 oC /35-80oF Light Sensitive
  4. Shelf life at room temperature is per the expiration date on the kit box. Rotate inventory to optimize shelf life.
E: Validity

18 months, detail information on the package.

สำหรับสินค้าโปรโมชัน ท่านสามารถติดต่อตัวแทนขายหรือเพิ่มเราเป็นเพื่อนใน LINE เพื่อสอบถามเพิ่มเติม

Scroll to Top

💥 For the promotion 💥

Please add our LINE below

💥สำหรับสินค้าโปรโมชั่น

กดเพิ่มเราเป็นเพื่อนใน LINE

คุณกำลังค้นหาอะไรอยู่?

พิมพ์คำค้นหาของคุณด้านขวา