4 Syringes (5g ea.), Accessories, Instruction

32% Phosphoric Acid Etchant with Benzalkonium Chloride

Uni-Etch w/BAC is a 32% phosphoric acid semi-gel etchant that is effective at quickly etching enamel and dentin. Uni-Etch w/BAC is polymer-thickened and effectively removes the smear layer, etches and demineralizes enamel and dentin. It is easily manipulated into small areas such as endodontically treated root canals and undercuts. This makes it more versatile than some thicker gel etchants for etching all restorative surfaces. Published research proves that BISCO etchants produce higher bond strengths to (wet or dry) dentin¹ and enamel.

• Rinses away cleanly and quickly leaving no residue to interfere with bonding
• Blue in color for easy visualization and contrast
• Creates microretentive surface characteristics that are necessary for successful bonding.
• New bulk syringe delivery system available
• Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Actinomyces viscosus².

NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.

Brochures

1. Kanca, J.J. “Etchant composition and bond strength to dentin”. Am J Dent 1993;6:162-164
2. Dr. Daniel Chan, University of Texas Health Science Center at San Antonio Dental School. Residual Effect of 1 and 2% Benzalkonium Chloride Incorporated into an Etchant on the Susceptibility of Actinomyces viscosus T14V. 1993

• 4 Syringes (5g ea.), Accessories, Instruction

37% Phosphoric Acid Etchant with Benzalkonium Chloride

Etch-37 w/BAC is a 37% phosphoric acid semi-gel etchant that is effective at quickly etching enamel and dentin. Etch-37 w/BAC is polymer-thickened and effectively removes the smear layer, etches, and demineralizes enamel and dentin. It is easily manipulated into small areas such as endodontically treated root canals and undercuts. This makes it more versatile than some thicker gel etchants for etching all restorative surfaces. Published research proves that BISCO etchants produce higher bond strengths to (wet or dry) dentin¹ and enamel.

• Rinses away cleanly and quickly leaving no residue to interfere with bonding
• Blue in color for easy visualization and contrast
• Creates microretentive surface characteristics that are necessary for successful bonding.
• New bulk syringe delivery system availabl
• Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Actinomyces viscosus².

NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.

Brochures

1 Bottle (30g), Instruction

37% Phosphoric Acid Etchant with Benzalkonium Chloride

Etch-37 w/BAC is a 37% phosphoric acid semi-gel etchant that is effective at quickly etching enamel and dentin. Etch-37 w/BAC is polymer-thickened and effectively removes the smear layer, etches and demineralizes enamel and dentin. It is easily manipulated into small areas such as endodontically treated root canals and undercuts. This makes it more versatile than some thicker gel etchants for etching all restorative surfaces. Published research proves that BISCO etchants produce higher bond strengths to (wet or dry) dentin¹ and enamel.

• Rinses away cleanly and quickly leaving no residue to interfere with bonding
• Blue in color for easy visualization and contrast
• Creates microretentive surface characteristics that are necessary for successful bonding.
• New bulk syringe delivery system availabl
• Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Actinomyces viscosus².

NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.

Brochures

• 1 Bottle (30g), Instruction

32% Phosphoric Acid Etchant with Benzalkonium Chloride

Uni-Etch w/BAC is a 32% phosphoric acid semi-gel etchant that is effective at quickly etching enamel and dentin. Uni-Etch w/BAC is polymer-thickened and effectively removes the smear layer, etches and demineralizes enamel and dentin. It is easily manipulated into small areas such as endodontically treated root canals and undercuts. This makes it more versatile than some thicker gel etchants for etching all restorative surfaces. Published research proves that BISCO etchants produce higher bond strengths to (wet or dry) dentin¹ and enamel.

• Rinses away cleanly and quickly leaving no residue to interfere with bonding
• Blue in color for easy visualization and contrast
• Creates microretentive surface characteristics that are necessary for successful bonding.
• New bulk syringe delivery system available
• Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Actinomyces viscosus².

NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.

Brochures

1. Kanca, J.J. “Etchant composition and bond strength to dentin”. Am J Dent 1993;6:162-164
2. Dr. Daniel Chan, University of Texas Health Science Center at San Antonio Dental School. Residual Effect of 1 and 2% Benzalkonium Chloride Incorporated into an Etchant on the Susceptibility of Actinomyces viscosus T14V. 1993

Resin-Modified Calcium Silicate Pulp Protectant/Liner

TheraCal LC is a light-cured, resin-modified calcium silicate filled liner designed for use in direct and indirect pulp capping and as a protective liner under composites, amalgams, cements, and other base materials. It can be used as an alternative to calcium hydroxide, glass ionomer, RMGI, IRM/ZOE and other restorative materials. TheraCal LC performs as a barrier and protectant of the dental pulpal complex.

TheraCal LC’s precise placement allows its use in all deep cavity preparations. The light-cured set permits immediate placement and condensation of the restorative material. Its proprietary formulation allows for a command set with a light curing unit while maintaining ease of placement due to thixotropic properties. The proprietary hydrophilic resin formulation creates a stable and durable liner.

Unique Benefits:

• Calcium release stimulates^1* hydroxyapatite and secondary dentin bridge formation^2,3
• Alkaline pH promotes healing and apatite formation^2,4
• Significant calcium release¹ leads to protective seal^5,7,8
• Protects and insulates the pulp^5,6
• Moisture tolerant¹ and radiopaque – can be placed under restorative materials and cements

Clinical Significance:

• The proprietary formulation of TheraCal LC consists of tri-calcium silicate particles in a hydrophilic monomer that provides significant calcium release* making it a uniquely stable and durable material as a liner or base

FAQ

What are the differences and similarities between TheraCal LC and Mineral Trioxide Aggregate (MTA) material?
TheraCal LC is a resin-modified calcium tri-silicate that has enhanced physical properties when compared to MTA material. Essentially, the primary chemical used in both materials are similar (Portland cement) but TheraCal LC contains a patent pending hydrophilic resin, which allows for immediate light curing and facilitates calcium release. Similar to MTA material, TheraCal LC promotes healing due to the alkaline pH, and the calcium release assists in the formation of dentin bridge.

What is the difference between TheraCal LC and Calcium Hydroxide
Calcium hydroxide is the primary chemical contained in many dentin liners and pulp capping agents. One of the known limitations of calcium hydroxide-based materials is their relatively high solubility, which leads to dissolution of the material over time.

Do I need to bond before placing TheraCal LC?
Bonding is not required or recommended before placement of TheraCal LC on dentin. TheraCal LC allows the maximum amount of calcium release. However, in a non-retentive preparation (such as a Class V non-carious cervical lesion), a bonding agent may be used prior to placement of TheraCal LC for an enhanced bond.

I am using RMGI for liners and pulp-capping; why should I switch?
TheraCal LC promotes hydroxyl-apatite formation through ion/water exchange with the tooth structure. Resin-modified glass ionomers are unable to promote hydroxyl-apatite formation and have been shown to be cytotoxic to the pulpal complex.  Due to the inclusion of polyacrylic acid, RMGI’s may actually inhibit apatite formation.

What can I use TheraCal LC for?
TheraCal LC can be used as a liner under all restorative materials. It can also be used as a direct or indirect pulp-capping agent.

Will TheraCal LC wash out over time?
No, TheraCal LC is virtually insoluble when compared to other traditional calcium hydroxide-based liners and pulp-capping agents.

Brochures

* Bisco has, on file, the calcium release data for Theracal LC.
1. Gandolfi MG, Siboni F, Prati C. Chemical-physical properties of TheraCal, a novel light-curable MTA-like material for pulp capping . International Endodontic Journal. 2012 Jun;45(6):571-9.
2. ADA definitions for direct and indirect pulp capping at: www.ada.org/en/publications/cdt/glossary-of-dental-clinical-and-administrative-ter
3. Apatite-forming Ability of TheraCal Pulp-Capping Material, M.G. GANDOLFI, F. SIBONI, P. TADDEI, E. MODENA, and C. PRATI J Dent Res 90 (Spec Iss A):abstract number 2520, 2011 (www.dentalresearch.org)
4. Okabe T, Sakamoto M, Takeuchi H, Matsushima K (2006) Effects of pH on mineralization ability of human dental pulp cells. Journal of Endodontics 32, 198-201.
5. Sangwan P; Sangwan A; Duhan J; Rohilla A. Tertiary dentinogenesis with calcium hydroxide: a review of proposed mechanisms. Int Endod J. 2013; 46(1):3-19
6. Selcuk SAVAS, Murat S. BOTSALI, Ebru KUCUKYILMAZ, Tugrul SARI. Evaluation of temperature changes in the pulp chamber during polymerization of light-cured pulp-capping materials by using a VALO LED light curing unit at different curing distances. Dent Mater J. 2014;33(6):764-9.
7. Cantekin K. Bond strength of different restorative materials to light-curable mineral trioxide aggregate. J Clin Pediatr Dent. 2015 Winter;39(2):143-8.
8. Mechanical Properties of New Dental Pulp-Capping Materials Over Time. M. NIELSEN, R. VANDERWEELE, J. CASEY, and K. VANDEWALLE, USAF, JBSA-Lackland, TX, , J Dent Res 93(Spec Iss A): 495, 2014 (www.dentalresearch.org)

1 Bottle All-Bond Universal (6ml), Instructions

Light-Cured Dental Adhesive

All-Bond Universal is the culmination of over 30 years of adhesive research at BISCO. As a universal adhesive it can be used with direct and indirect restorations and is formulated to be compatible with light-, dual- and self-cured materials. The versatility of All-Bond Universal makes it an indispensable part of any dental practice.

Unique Benefits:

• Not moisture sensitive use on wet, dry or moist tooth structure
• Impressive bond strength to ALL substrates
• Use with ALL direct and indirect restorations (<10 micron thickness)
• Ideal chemical balance for both total- and self-etch adhesion from one bottle
• Compatible with ALL resin cements (no additional activator required)
• Virtually no post-operative sensitivity

Clinical Significance:

• All-Bond Universal offers the flexibility for total-, self- and selective-etch procedures
• All-Bond Universal is compatible with all light-, self- and dual-cured resin composite and cement materials for all direct and indirect procedures
• Other single bottle adhesives may need more than 1 bottle for indirect restorations, but with All-Bond Universal, NO activator is required.

Brochures

Select HV Etch 30 ml
Contents: 4 Syringes Select HV Etch w/BAC (5g ea.), 50 Disposable Syringe Tips, Instructions

35% Phosphoric Acid Etchant with Benzalkonium Chloride

Select HV Etch is a superior 35% high viscosity phosphoric etch available with Benzalkonium Chloride (BAC). Select HV Etch is used to condition the tooth structure before bonding adhesives, composites, or sealants. Select HV Etch is specially formulated for maximum working and handling, pin-point placement performance, and eliminating run-on onto the dentin surface.

NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.

Unique Benefits:

• Rinses away cleanly and quickly leaving no residue to interfere with bonding
• Blue in color for easy visualization and contrast
• Microretentive surface characteristics that are necessary for successful bonding

Clinical Significance:

• Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Streptococcus mutans^1,2.

Brochures

1. M.Sc.Dt. Emre ÖZEL, Dr. Haktan YURDAGÜVEN, Yrd.Doç.Dr. Esra CAN SAY, Prof.Dr. Sesin KOCAGÖZ, Evaluation of the Antibacterial Activity of Disinfectant Solutions with Phosphoric Acids Against Streptococcus Mutans. Journal of Hacettepe Faculty of Dentistry, Volume: 29, Issue 4, Page: 8-14, 2005

2. M. TURKUN1, Z. ERGUCU, L.S. TURKUN, E.U. CELIK, and M. ATES, Is Phosphoric Acid Sufficiently Antibacterial?,J Dent Res 85 (Spec Iss B):abstract number 1605, 2006 (www.dental research.org).

Light-cured Core Build-Up Composite

Light-Core is a light-cured core build-up composite. Sculptable and non-slumping, it provides optimal handling. Light-Core has a 5mm depth of cure* at 500 mW/cm². Light-Core is available in two shades: Translucent and Blue. Translucent is ideal for use under aesthetic restorations, such as all-ceramic crowns, inlays and onlays. Blue is ideal for use in conventional fixed restorations, such as metal-based restorations (all-metal or PFM). Blue facilitates placement when a contrast to tooth structure is desired. This contrast ensures your margins will be placed on tooth structure where they belong. Choose from economical syringes or convenient unit-dose tips.

Unique Benefits

• Light-cured core material allows for immediate prepping after curing
• 5mm depth of cure* promotes quick build-ups
• Strong, fiber reinforced (7.8%) core material offers maximum strength for all core build-ups
• Non-slumping, sculptable material yields great handling and is easy to contour
• Radiopaque material is easily identified on radiographs

Clinical Significance

• Radiopaque Translucent shade is ideal for use under aesthetic restorations
• Radiopaque Blue shade facilitates ease of placement and is ideal for use when you need a contrasting color to confirm that your margins are on tooth structure. Recommended for use under metal-based restorations.

* Based on in-vitro studies, Light-Core has a 5mm depth of cure when cured from a distance of 0mm at an intensity of 500 mW/cm² for the following curing times:

• Light-Core TRANSLUCENT: 20 seconds
• Light-Core BLUE: 30 seconds

Aelite LS Posterior is a light-cured, highly filled, low shrinkage posterior composite that helps to reduce contraction stress to overcome stress related problems¹. Due to the high filler content, handling of this composite simplifies establishment of occlusal contours, proximal surfaces and interproximal contacts.

Unique Benefits:

• Proprietary filler enhances handling properties, featuring higher control for sculptability with minimal tackiness and pull back
• Highly filled (88% by weight) material provides exceptional strength and polishing luster

Clinical Significance:

• Low shrinkage provides long-term patient satisfaction
• Excellant strength in addition to radiopacity and wear resistance makes Aelite LS Posterior an ideal choice for a posterior composite

AELITE™ Aesthetic Universal Kit
An ideal restoration requires the perfect blend of durability and esthetics. The Aelite Aesthetic Universal System is designed to create this perfect blend quickly and easily. The kit contains Aelite All-Purpose Body, a highly filled, reinforced composite to mimic the dentin layer. Aelite Aesthetic Enamel and Aelite Aesthetic Enamel Incisal are included to create the enamel layer with excellent polishability and reinforced strength. These composites along with BISCO’s top rated adhesive system and BisCover™ LV provide the complete anterior and posterior restorative solution.

Brochures

1. Cadenaro M., Biasotto M., Scuor N., Breschi L., Davidson C.L., Di Lenarda R. Assessment of polymerization contraction stress of three composite resins. Dent Mater., Aug 2007;24;681-685.

* VITA is a registered trademark of VITA ZAHNFABRIK H. Rauter GmblH & Co. KG Germany.

Low Modulus Microhybrid Composite / Radiopaque Low Viscosity Composite

Aeliteflo is a filled, light-cure, microhybrid composite with flow characteristics which make it ideal for Class V cavity configurations as well as Class III`s and small Class IV`s.
Other uses of this material may be as a pit and fissure sealant, repair of marginal defects, small core build-up, blocking out under cuts, porcelain repair,porcelain veneer cementation or as flowable composite for bonding fibrous splints into place.
This filled (60% by weight), barium glass composite is highly polishable and radiopaque for easy identification on radiographs.
AELITEFLO has unique thixotropic properties to prevent it from slumping for better control in hard to access areas.Using the provided tips. and is easily injected directly into the cavity preperation and can be shaped by the tip itself.

Aeliteflo LV is a multi-use flowable resin based composite with high radiopacity.

Unique Benefits

• Extremely easy handling for effortless adaption to dentition
• Microhybrid formula provides outstanding strength
• Aeliteflo has demonstrated over 15 years of proven clinical

Clinical Significance

• Due to its elastic properties, Aeliteflo “bends with the tooth”, leading to better retention. Excellent for abfraction lesions and Class V defects
• Aeliteflo LV exhibits superior radiopacity for easy detection on radiographs

Brochures

REALITY and Dental Advisor ratings based on evaluation with Aeliteflo.